Sign Out
Do not use if package is damaged.
Do not use when the partition seals between chambers are broken.
Use only if glucose solution and amino acid solution with electrolytes are transparent, and fat emulsion is homogeneous.
Mix the contents of each chamber right before use.
Discard any remaining mixture after administration.
Direction for Use: 1. Tear off the plastic overpouch from the perforation and then pull out the parenteral bag.
2. Place the inner bag on a flat surface. The white compartment FLUID C (Fat Emulsion) should be on the bottom right and the infusion port on the top.
3-1. Break the partition seal by pressing the compartment of Fluid B (amino acids) with both palms, and then do the same with the seal of Fluid C.
3-2. Or, from the state of 2, break the partition seals by rolling with pressing the bag from the hanger hole with hands. Roll while all seals are broken.
4. Mix well by shaking the bag 2-3 times.
5. In case additives are needed to be mixed, remove the additive port cap to introduce the additives and shake the bag so that TNA mixture and additive are mixed well.
6. Connect the infusion set to the infusion port, and then administer into peripheral vein or central vein.
Continue with Google