Similac Total Comfort 1 Dosage/Direction for Use

Consult the doctor about how much the baby should be consuming. These are only suggested feeding intakes. (See Table 2.)

Click on icon to see table/diagram/image

1. Thoroughly wash feeding bottle, nipple, cap and all utensils to be used in preparing the feeding.
2. After rinsing soap from the utensils, boil them for 5 minutes. Provide clean surface on which to prepare the formula.
3. In a separate pan, heat water in a rolling boil for 5 minutes and allow it to cool. Pour the correct amount of warm previously boiled water into the sterilized feeding bottle.
4. Fill enclosed scoop by pressing against the tin, then scrape level with the sharp edge of a knife.
5. Add one level scoop of Similac Total Comfort 1 to each 60 mL of water in bottle.
6. Mix until completely dissolved. Test the temperature and feed.
Directions for preparation and use: Use as directed by the physician. Powdered infant formulas are not sterile and should not be fed to premature infants or infants who might have immune problems unless directed and supervised by the doctor. Use water that has previously been heated at a full rolling boil for 5 minutes. Allow the water to cool and follow mixing instructions carefully. Use only the scoop (8.89 g) enclosed in the tin to measure Similac Total Comfort 1. If more than one feeding is prepared, it must be refrigerated at 35°F-40°F (2°C-4°C) and used within 24 hours. Once feeding begins, use within one hour or discard.