AeroChamber Caution For Usage

Cleaning Instructions: This chamber can be used right out-of-package and then cleaned weekly.
Remove the backpiece. To detach the frontpiece, twist chamber.
Soak the parts for 15 minutes in a mild solution of liquid dish detergent and lukewarm clean water. Agitate gently. Rinse parts in clean water.
Alternatively, place parts in top rack of dishwasher. Ensure product is securely placed face up. Run the dishwasher on a normal or light cycle. Do not heat dry.
Shake out excess water and allow to air dry in a vertical position. Ensure parts are dry before reassembly.
To reassemble, fit the frontpiece on the end of the chamber and twist firmly until securely locked into position. Center the alignment feature on the backpiece with the Flow-Vu Inhalation Indicator. Press firmly to attach the backpiece.
Notes: Product should be replaced after 12 months of use.
Do not share this medical device.
Product is free of Bisphenol A, Phthalates, Latex, Lead and PVC.
If the patient notices medication build-up in the chamber, wash the inside of the chamber gently with a soft cloth.
Dishwashing with overly dirty dishes is not recommended.
If cleaning in a dishwasher use a rinse aid.
For cleaning of the inhaler, follow the instructions supplied with the inhaler.
The chamber device can be disposed of with domestic waste unless this is prohibited by the disposal regulations prevailing in the respective countries.
Put cap back on the mouthpiece and store in a clean, dry area when not in use.
Testing has been conducted with the following disinfectant solutions: Milton, Dodie, Perasafe.
Test results indicate that the solutions tested have no adverse effect on the performance of the device.
Caution: Do not boil or sterilize. Product may be permanently damaged if boiled, sterilized or cleaned in a dishwasher at a temperature above 70°C.